Relating catalyst structure and composition to the water–gas shift activity of Cu–Zn-based mixed-oxide catalysts

In order to investigate the effect of cerium oxide on Cu–Zn-based mixed-oxide catalysts four catalyst samples were characterized by means of XRD, in situ XANES and thermogravimetric analysis. The activity of the catalyst samples was tested for the forward water–gas shift reaction. Cerium oxide was found to increase the crystallinity of the ZnO phase indicating a segregation of the Cu and ZnO phases. The TOF of the water–gas shift reaction based on chemisorption data was found to be independent of composition and preparation conditions of the four catalyst samples. In contrast, the catalyst stability depends on composition and preparation conditions. Cerium oxide impregnated before calcination of the hydrotalcite-based Cu–Zn precursors leads to a more stable water–gas shift catalyst.     

Modellqualität als Indikator für Softwarequalität: eine Taxonomie

Zusammenfassung  Komplexit?t, Anforderungsmanagement und Variantenvielfalt sind zentrale Herausforderungen bei der Entwicklung und Evolution heutiger softwaregesteuerter Systeme. Diesen wird zunehmend durch den Einsatz modellbasierter Entwicklungsmethoden begegnet. Dadurch wird das Modell zum zentralen Artefakt und die Erstellung und Nutzung von Modellen zu einer zentralen T?tigkeit in der Softwareentwicklung. Mit der Bedeutung der Modelle steigen auch die Ansprüche an ihre Qualit?t. Dieser Beitrag untersucht die Implikationen, die daraus entstehen, insbesondere werden sinnvolle Qualit?tsmerkmale für softwarebeschreibende Modelle identifiziert und diskutiert.     

Softwarekartographie

Zusammenfassung  Anwendungslandschaften in Unternehmen sind langlebige hoch-komplexe Strukturen bestehend aus hunderten bis tausenden von miteinander vernetzten betrieblichen Informationssystemen, die von Personen mit sehr unterschiedlichen Interessen und Erfahrungshintergrund konzipiert, erstellt, modifiziert, betrieben, genutzt und finanziert werden. Die Softwarekartographie zielt darauf ab, die Kommunikation zwischen diesen Personen durch zielgruppenspezifische verst?ndliche graphische Visualisierungen zu unterstützen, die Gesch?fts- und Informatik-Aspekte gleicherma?en berücksichtigen, und die speziell für langfristige und strategische Management-Betrachtungen geeignet sind. In diesem Beitrag fassen wir zun?chst die in der betrieblichen Praxis wohlbekannten Probleme beim Management von Anwendungslandschaften zusammen und diagnostizieren erhebliche Kommunikationsdefizite. Da Anwendungslandschaften als Systeme von Systemen mit Menschen als integrale Systembestandteile zu verstehen sind, werden Karten als attraktiver L?sungsansatz identifiziert und die wesentlichen Konzepte der Softwarekartographie anhand von Beispielen vorgestellt. Dabei werden Querbezüge zu anderen Fachgebieten der Informatik und Wirtschaftsinformatik hergestellt, und die bisherige Nutzung der Forschungsergebnisse in der Praxis gezeigt.     

Composing RESTful Services and Collaborative Workflows: A Lightweight Approach

The use of RESTful Web services has gained momentum in the development of distributed applications based on traditional Web standards such as HTTP. In particular, these services can integrate easily into various applications, such as mashups. Composing RESTful services into Web-scale workflows requires a lightweight composition language that's capable of describing both the control and data flow that constitute a workflow. The authors address these issues with Bite, a lightweight and extensible composition language that enables the creation of Web-scale workflows and uses RESTful services as its main composable entities.     

Applications of the discrete element method in mechanical engineering

Compared to other fields of engineering, in mechanical engineering, the Discrete Element Method (DEM) is not yet a well known method. Nevertheless, there is a variety of simulation problems where the method has obvious advantages due to its meshless nature. For problems where several free bodies can collide and break after having been largely deformed, the DEM is the method of choice. Neighborhood search and collision detection between bodies as well as the separation of large solids into smaller particles are naturally incorporated in the method. The main DEM algorithm consists of a relatively simple loop that basically contains the three substeps contact detection, force computation and integration. However, there exists a large variety of different algorithms to choose the substeps to compose the optimal method for a given problem. In this contribution, we describe the dynamics of particle systems together with appropriate numerical integration schemes and give an overview over different types of particle interactions that can be composed to adapt the method to fit to a given simulation problem. Surface triangulations are used to model complicated, non-convex bodies in contact with particle systems. The capabilities of the method are finally demonstrated by means of application examples. Commemorative Contribution.     

Arthroscopic lysis in knee arthrofibrosis

OBJECTIVE: To compare the efficacy and toxicity of three patient-controlled analgesia (PCA) morphine regimens. DESIGN: A prospective, randomized, pilot study of three PCA morphine regimens: (1) 1 mg with 6-minute lockout (n = 10), (2) 2 mg with 12-minute lockout (n = 12), and (3) 2 mg with 20-minute lockout (n = 12). SETTING: Large teaching institution. PARTICIPANTS: Thirty-four patients undergoing cholecystectomy or hysterectomy. MAIN OUTCOME MEASURES: Pain scores (0 = no pain, 1 = mild pain, 2 = moderate pain, 3 = severe pain), sedation scores, analgesic consumption, and patient attempts (patient activation of PCA device) and injections (doses actually delivered) were evaluated using analysis of covariance. Distribution of pain and sedation scores and adverse effects were assessed using Fisher's exact test. RESULTS: Data on 24 patients were evaluable. Six patients withdrew for poor pain control (2 in group 1, 1 in group 2, and 3 in group 3). Three other patients withdrew because of adverse effects and 1 withdrew because of pump problems. Mean morphine consumption did not differ significantly among the groups. Distribution of pain and sedation scores and the number of patients with nausea were similar across treatment groups. The mean injection to attempt ratio was significantly smaller in group 3 (0.71 +/- 0.11) compared with groups 1 and 2 (0.9 +/- 0.06 and 0.83 +/- 0.09, respectively; p = 0.001). Adverse events occurred similarly among treatment groups. CONCLUSIONS: No significant differences in the efficacy or toxicity of the three morphine PCA regimens were identified.     

VRCTC-310--a novel compound of purified animal toxins separates antitumor efficacy from neurotoxicity

Two purified animal venom toxins, crotoxin and cardiotoxin, have been combined to produce a unique natural product (VRCTC-310) currently under investigation as an antitumor agent by the National Cancer Institute. In vitro, it has demonstrated cytotoxic disease specificity and a unique mechanism of action when submitted to COMPARE analysis. In vivo, tolerance was developed to the neurotoxic properties of crotoxin which allowed comparison of several schedules of fixed and escalating daily i.m. doses to mice bearing s.c. Lewis Lung carcinoma. An 83% inhibition of tumor growth was achieved using an escalating dose schedule starting at 1.8 mg/kg and reaching 6.3 mg/kg/day on day 20. Although some irritation around the sites of i.m. injection was noted, animal weight loss was negligible and there were no other signs of adverse toxicity. This natural product represents a new, membrane interactive anticancer agent which produces a unique spectrum of cytotoxicity in vitro and which has demonstrated interesting in vivo antitumor efficacy.     

Cost-effective smart power CMOS/DMOS technology: design methodology for latch-up immunity

To answer to the need of a cost effective smart power technology, an original design methodology that permits implementing latch-up free smart power circuits on a very simple CMOS/DMOS technology is proposed. The basic concept used to this purpose is letting float the wells of the MOS transistors most susceptible to initiate latch-up. The efficiency of the design methodology is experimentally shown.     

An efficient sampling scheme: Updated Latin Hypercube Sampling

An efficient sampling scheme called Updated Latin Hypercube Sampling is presented. The proposed method is an improved variant of Latin Hypercube Sampling. It uses specially modified tables of independent random permutations of rank numbers which form the strategy of generating input samples for a simulation procedure. The method is presented in order to obtain these specially modified tables. The aim of this paper is to compare estimates of certain widely used statistical parameters obtained by Updated Latin Hypercube Sampling, Latin Hypercube Sampling and Simple Random Sampling. It is shown that Updated Latin Hypercube Sampling usually results in a substantial decrease of the variance in the estimates of commonly used statistical parameters and that the bias is quite small for a moderate number of simulations. This sampling technique seems to be generally very useful, efficient and superior to other methods especially in the case of statistical, sensitivity and probability analyses of complex analytical models with random input variables.